LogTag with LCD Display (Model TRID30-7R)

A$180.00 incl. GST

LogTag with LCD Display (Model TRID30-7R)

See temperatures and alerts at a glance. Features a clear display that tells you current temperature, maximum and minimum logged temperatures, alarms, and more.


Note: Bulk pricing will be applied in the shopping cart.

7K Reading Memory

7,000 readings enough for 53 days at 10 minute interval logging or 80 days at 15 minute intervals.

30 Day Readout

The display offers a summary of the last 30 days of logging, showing on what days temperature violations occurred. That day's data can be reviewed on-screen.

Replaceable Battery

This model features a replaceable battery. The battery is a regular watch battery, readily available for leading retailers.

See temperature data at a glance

For refrigerators and coolrooms  in constant use, having a logger that gives an accurate display of current temperature and alarm status is a real advantage.

Firstly, it gives staff a visual reinforcement of the importance of keeping the doors closed, but crucially, lets them know when an alert has occurred.

This model has the internal sensor, so no probe is needed.

LogTag with Display close up

Reading the display

The LogTag display has lots of information for you.

In the top right corner, you can see the battery status. The replaceable battery in this logger should last about a year. The battery is a common type and replacements are readily available for a few dollars.

The big displays at the top are time and current temperature. Time is set automatically from your computer and displays in 24-hour format.

On the pictured display, you can see that between those displays, is the word ALARM, showing that the alarm conditions you configured have been met.

At the bottom of the screen are the days when alarms occurred.


Product ModelTRID30-7R (Replaceable Battery)
Sensor Measurement Range-30°C to +60°C (-40°F to +210°F).
Operating Temperature Range-30°C to +60°C (-22°F to +140°F).
Storage Temperature Range-10°C to +40°C (14°F to +104°F).
Rated Temperature Reading AccuracyBetter than ±0.5°C (±0.9°F) for measurements from -20°C to +30°C (-4°F to +104°F), typically ±0.3°C (0.6°F). Better than ±0.8°C (±1.5°F) for other measurements – typically ±0.5°C (0.9°F). Actual performance is typically much better than the rated values. Please see the Rated Absolute Accuracy chart below. Accuracy figures can be improved by recalibration.
Rated Temperature Reading Resolution0.1°C (0.2°F) for measurements -40°C to +50°C (-40°F to +122°F). 0.2°C (0.4°F) for measurements +50°C to +70°C (+122°F to +158°F). Please see the Rated Native Resolution chart below. LogTag Analyzer® currently displays to one decimal place of °C or °F. The native resolution is what is stored in the LogTag®.
Sensor Reaction TimeTypically less than 5 minutes (T90) in moving air (1m/s) in EN12830:1999.
Recording Capacity7,770 temperature readings. 53 days @ 10min logging, 80 days @ 15min logging. Day summary statistics memory (for display on LCD): up for 30 days of Max/Min/duration and alarm trigger statistics.
Sampling IntervalConfigurable from 1 minute to hourly.
Logging Start OptionsPush button start (with configurable start delay from 1 minute to 18 hours) or specific date & time.
Recording Indication“REC” symbol on LCD
Download TimeTypically less than 5 seconds for full memory (7,770 readings), depending on computer or readout device used.
EnvironmentalIP65 (roughly equivalent to NEMA 4) when vertically mounted or hung.
Power Source3V Li-Mg Battery.
Battery LifeTRID30-7R: Typically 1 year of operation. NOTE: Typical battery life assumes 6 minute logging, day statistics are reviewed on the display no more than once daily for no longer than 30 seconds each time. Download data monthly.
Real Time ClockBuilt-in real time clock. Rated accuracy ±25ppm @ 25°C (equivalent to 2.5 seconds/day). Rated temperature coefficient is -0.034 ±0.006ppm/°C (I.e typically +/- 0.00294 seconds/day/°C).
Connection InterfaceInterface Cradle
SoftwareLogTag® Analyzer
Size93mm(H) x 54.5mm(W) x 8.6mm(T).
WeightTRID30-7R: 41g.
Case MaterialPolycarbonate.
Compliance and CertificationsFDA CFR21 Part 11FCC EMC Directive CE EMC DirectivesConforms to RoHS

Do you have the USB Reader Interface?

To use this LogTag, you will need a USB interface and the LogTag Analyzer software installed on your PC.

This LogTag uses the same Reader as other LogTags, so if you already have one, it will work with these  models.

If not, make sure you order one as well. As a bonus, we include the latest free LogTag Analyzer software on USB.