If you only need to monitor one or two fridges or freezers, then this USB model provides all the features of the standard LogTag without the need to buy a LogTag Interface.
If you only need to monitor one or two fridges or freezers, then this USB model provides all the features of the standard LogTag without the need to buy a LogTag Interface. (If you are monitoring more than that then the standard LogTag is more cost effective.)
You need to install a copy of the free LogTag Analyser software on your PC to program the logger prior to use.
Then, to retrieve results you can either
The automatically generated PDF make this an ideal logger for tracking your cold chain transport.
Pack a USB LogTag with your goods and the receiver can plug it into any PC (no software needed) and download the report.
Configure the Tag to use Push Button Start and there is no rush about getting the Tag from the Reader to the refrigerator. Logging will not begin until the Start button is pushed.
If the Tag logs temperatures outside the safe range you have set, the Alert LED will flash red, giving you a handy visual notification that there has been a problem.
The LogTag is so simple to set up and use that you'll be an expert in no time. We have a full LogTag training program on our site
|Sensor Measurement Range||-25°C to +70°C (-13°F to +158°F)|
|Operating Temperature Range||-25°C to +70°C (-13°F to +158°F).|
|Storage Temperature Range||0°C to +40°C (32°F to +104°F).|
|Rated Temperature Reading Accuracy||Better than ±0.5°C (±0.9°F) for -20°C to +40°C (-4°F to +104°F). Better than ±0.7°C (±1.3°F) for -25°C to -20°C (-13°F to -4°F) & +40°C to +60°C (+104°F to +140°F). Better than ±0.8°C (±1.5°F) for +60°C to +70°C (+140°F to +158°F). Actual performance is typically much better than the rated values. Please see the Rated Absolute Accuracy chart below. Accuracy figures can be improved by recalibration.|
|Rated Temperature Reading Resolution||Less than 0.1°C/F. Please see the Rated Native Resolution chart below. LogTag Analyzer® currently displays to one decimal place of °C or °F. The native resolution is what is stored in the LogTag®.|
|Sensor Reaction Time||Typically less than 7 minutes (T90) in moving air (1m/s) in EN12830:1999.|
|Recording Capacity||16,129 temperature readings. 56 days @ 5min logging, 168 days @ 15min logging.|
|Sampling Interval||Configurable from 1 minute to 18 hours.|
|Logging Start Options||Push button start (with configurable start delay from 1 minute to 72 hours) or specific date & time.|
|Recording Indication||Flashing ‘OK’ indicator / flashing ‘ALERT’ indicator.|
|Download Time||Typically with full memory (16,129 readings) in less than 30 seconds from time of insertion to availability of PDF report. Typically less than 10 seconds from time of insertion to availability of LTD file in LogTag® Analyzer (if configured).|
|Environmental||IEC 60529: IP64 with USB cap fitted.|
|Power Source||3V Li-Mg Battery.|
|Battery Life||Typically 2 – 3 years with normal use (15 minute sampling interval, download data monthly), provided Logger is kept within the Storage Temperature Range when not in use.|
|Real Time Clock||Built-in real time clock. Rated accuracy ±25ppm @ 25°C (equivalent to 2.5 seconds/day). Rated temperature coefficient is -0.034 ±0.006ppm/°C (I.e typically +/- 0.00294 seconds/day/°C).|
|Connection Interface||USB 2.0, A-type plug|
|Software||PDF Reader, LogTag® Analyzer 2.5 or higher|
|Size||93mm(H) x 54.5mm(W) x 8.6mm(T) including protective USB cap.|
|Compliance and Certifications|
Your best bet for most situations.
This is by far our most popular model and, unless you have special requirements, your best bet for temperature logging.
$70.00 excl. GST
Go where other LogTags can’t
This is the perfect LogTag when you need to measure temperatures inside products.
Monitor temperatures inside coolers, underwater or in small spaces.
Do you have MediSafe refrigerator from Quirks?
The battery in the LogTag supplied with your MediSafe refrigerator will last between two and four years, depending on your sample rate. The batteries are not replaceable, so when you see that your battery is low, you will need to order this replacement logger.
$115.00 excl. GST
For extremely low temperatures – with no messy probes
This specialist LogTag will record temperatures as low as -80°C – the temperature of dry ice. You can place the logger directly in with your dry ice shipment (no need for a probe) to log temperatures across the journey.
The logger is reusable and will last up to 1,000 hours at -80°C.
$150.00 excl. GST
See temperatures and alerts at a glance
Need to see temperatures and temperature events without connecting your logger to a computer? This latest LogTag has a clear display that tells you current temperature, maximum and minimum logged temperatures, alarms, and more.
$160.00 excl. GST
Now with audible alarm
The new release of this popular logger features a new display layout, audible alarm and expanded 15,900 reading memory. Works with all LogTag external probes.
Monitor Dry Ice containers without opening them
Insert the probe into your container and attach your LogTag Dry Ice temperature logger. The LED Alert will tell you at a glance if the temperature has risen above your limit.
Works with all LogTag external probes.
Upgrade the logger on your Quirks Medisafe refrigerator to this premium model with LCD Display and audible alarm. See current temperatures and alerts at a glance.
$160.00 excl. GST
Log Relative Humidity
If you need to record Humidity as well as Temperature, this is the model for you. Works with the standard USB Reader.
$165.00 excl. GST
ABN 36 093 811 271
p: 1300 30 33 34
f: +61 2 9614 6891
PO Box 1007,
NSW 2153, Australia