Lots of industries need an accurate measure of relative humidity. The LogTag with Temperature and Humidity provides a record of these important factors.
Configure the Tag to use Push Button Start and there is no rush about getting the Tag from the Reader to the refrigerator. Logging will not begin until the Start button is pushed.
If the Tag logs temperatures outside the safe range you have set, the Alert LED will flash red, giving you a handy visual notification that there has been a problem.
The LogTag is so simple to set up and use that you'll be an expert in no time. We have a full LogTag training program on our site
We have sold these LogTags to:
Their unmatched accuracy, large memory and small form factor are all great features to consider.
Anyone who has had anything to do with server and comms rooms will know the importance of a good HVAC system to prevent temperature hot spots.
But did you know that humidity is also a vital ingredient. If the humidity is too low, static electricity can build up and cause issues. If it is too high, condensation can form inside vital components.
A LogTag Temperaure and Humidity logger is a great investment to monitor the environment in your server room.
|Sensor Measurement Range||-40°C to +85°C (-40°F to +185°F).|
|Operating Temperature Range||-40°C to +85°C (-40°F to +185°F).|
|Storage Temperature Range||0°C to +40°C (-32°F to +140°F).|
|Humidity Measurement Range||0% RH to 100% RH, with limitations.|
|Humidity Operating Range||0% RH to 100% RH, with limitations.|
|Storage Humidity Range||0-65%, non condensing.|
|Humidity Resolution||Better than 0.1% RH.|
|Temperature Resolution||Better than 0.1°C or 0.1°F|
|Recording Capacity||8,031 pairs of humidity and temperature readings. 53 days @ 10min logging, 80 days @ 15min logging.|
|Sampling Interval||Configurable from 30 seconds to several hours.|
|Logging Start Options||Push button start or specific date & time. Optional start delay of up to 18hours.|
|Recording Indication||Flashing ‘OK’ indicator / flashing ‘ALERT’ indicator.|
|Download Time||Typically less than 10 seconds for full memory (8,031 pairs of humidity and temperature readings), depending on computer or readout device used.|
|Power Source||3V Li-Mg Battery.|
|Battery Life||2 – 3 years of normal use (based on 15 minute logging, download data monthly).|
|Real Time Clock||Built-in real time clock. Rated accuracy ±25ppm @ 25°C (equivalent to 2.5 seconds/day). Rated temperature coefficient is -0.034 ±0.006ppm/°C (I.e typically +/- 0.00294 seconds/day/°C).|
|Size||86mm(H) x 54.5mm(W) x 8.6mm(T).|
|Compliance and Certifications|
To use this LogTag, you will need a USB interface and the LogTag Analyzer software installed on your PC.
This LogTag uses the same Reader as other LogTags, so if you already have one, it will work with these models.
If not, make sure you order one as well. As a bonus, we include the free Analyzer software on CD.
Your best bet for most situations.
This is by far our most popular model and, unless you have special requirements, your best bet for temperature logging.
$88.00 incl. GST
Go where other LogTags can’t
This is the perfect LogTag when you need to measure temperatures inside products.
Monitor temperatures inside coolers, underwater or in small spaces.
USB Temperature Loggers
No Reader Interface Required
Only have a couple of sites to monitor? This logger has the USB built in so no external Reader is required
For extremely low temperatures – with no messy probes
This specialist LogTag will record temperatures as low as -80°C – the temperature of dry ice. You can place the logger directly in with your dry ice shipment (no need for a probe) to log temperatures across the journey.
The logger is reusable and will last up to 1,000 hours at -80°C.
$165.00 incl. GST
See temperatures and alerts at a glance
Need to see temperatures and temperature events without connecting your logger to a computer? This latest LogTag has a clear display that tells you current temperature, maximum and minimum logged temperatures, alarms, and more.
$198.00 incl. GST
Now with audible alarm
The new release of this popular logger features a new display layout, audible alarm and expanded 15,900 reading memory. Works with all LogTag external probes.
Monitor Dry Ice containers without opening them
Insert the probe into your container and attach your LogTag Dry Ice temperature logger. The LED Alert will tell you at a glance if the temperature has risen above your limit.
Works with all LogTag external probes.
$214.50 incl. GST
ABN 36 093 811 271
p: 1300 30 33 34
f: +61 2 9614 6891
PO Box 1007,
NSW 2153, Australia