The new release of this popular logger features a new display layout, audible alarm and expanded 15,900 reading memory. Works with all LogTag external probes.
This LogTag has enough memory for 15,900 recordings - that's 66 days at 6 minute intervals.
If the Tag logs temperatures outside the safe range you have set, you will be alerted by an audible alarm. You can check the status of the logger on screen.
This model features a replaceable battery. The battery is a regular watch battery, readily available for leading retailers.
How warm did your vaccine stock get? See at a glance.
Attaching this LogTag to a vial filled with glycol (antifreeze), gives you the most accurate measurement of actual liquid temperatures. See any temperature events at a glance and get an audible alarm if temperatures are out of range.
Place the probe inside your cool transport container running out to your LogTag, and you will have an accurate display of the temperature inside without opening the lid. An audible alert will sound if the internal temperature breaches limits.
If you have a Medisafe refrigerator and would prefer to have a logger with temperature display, this model is a completely compatible replacement.
ST100B – Untipped
Bare sensor without stainless sheath ready for fitting to custom probe assembly.
Not rated for food contact or environmentally rated.
40mm tip length, ⌀3.2mm
65mm tip length, ⌀3.2mm
90mm tip length, ⌀3.2mm
30mm tip length, ⌀5mm
Available with 1.5m or 3m cable
140mm tip length, ⌀5mm
Handled with 105mm tip length, ⌀5mm
|Product Model||TRED30-16R (Replaceable Battery)|
|External Sensor Measurement Range||-40°C to +99°C (-40°F to +210°F).|
|Operating Temperature Range||-30°C to +60°C (-22°F to +140°F).|
|Storage Temperature Range||-10°C to +40°C (14°F to +104°F).|
|Rated Temperature Reading Accuracy||Better than ±0.5°C (±0.9°F) for -20°C to +40°C (-4°F to +104°F), typically ±0.3°C (0.6°F). Better than ±0.8°C (±1.4°F) for -40°C to -20°C (-40°F to -4°F), typically ±0.5°C (0.9°F). Better than ±0.8°C (±1.4°F) for +40°C to +70°C (+104°F to +158°F), typically ±0.7°C (1.3°F). Better than ±1.2°C (±2.2°F) for +70°C to +99°C (+158°F to +210°F), typically ±1°C (1.8°F). Actual performance is typically much better than the rated values. Please see the Rated Absolute Accuracy chart below. Accuracy figures can be improved by recalibration.|
|Rated Temperature Reading Resolution||0.1°C (0.2°F) for measurements -40°C to +50°C (-40°F to +122°F). 0.2°C (0.4°F) for measurements +50°C to +70°C (+122°F to +158°F). 0.3°C (0.5°F) for measurements +70°C to +80°C (+158°F to +176°F). 0.4°C-0.6°C (0.7°F to 1°F) for measurements +80°C to +99°C (+176°F to +210°F). Please see the Rated Native Resolution chart below. LogTag Analyzer® currently displays to one decimal place of °C or °F. The native resolution is what is stored in the LogTag®.|
|Sensor Reaction Time||Typically less than 2 minutes (T90) in moving air (1m/s) for ST100T, ST100H and ST100S types.|
|Recording Capacity||15,905 temperature readings. 66 days @ 6min logging. Day summary statistics memory (for display on LCD): up for 30 days of Max/Min/duration and alarm trigger statistics.|
|Sampling Interval||Configurable from 30 seconds to hourly.|
|Logging Start Options||Push button start or specific date & time. Optional start delay of up to 18 hours.|
|Recording Indication||State indicator “RECORDING”.|
|Download Time||Typically less than 10 seconds for full memory (15,905 readings), depending on computer or readout device used.|
|Environmental||IP61 (when vertically mounted or hung).|
|Power Source||3V CR2032 (LiMnO2) coin cell battery, user replaceable.|
|Battery Life||Typically 1 year of operation. NOTE: Typical battery life assumes 6 minute logging, day statistics are reviewed on the display no more than once daily for no longer than 30 seconds each time. Download data monthly. NOTE: Continual activation of the audible alarm will reduce the working life of the battery. When an alarm is triggered, the alarm should be cleared and reset as soon as possible.|
|Real Time Clock||Built-in real time clock. Rated accuracy ±25ppm @ 25°C (equivalent to 2.5 seconds/day). Rated temperature coefficient is -0.034 ±0.006ppm/°C (I.e typically +/- 0.00294 seconds/day/°C).|
|Standard Remote Sensor Cable Length||Standard: 1.5m (4’11″). Extended: 3m (9’10″) (Recommended maximum).|
|Remote Sensor Cable Type||PTFE (FDA food contact rated), coaxial.|
|Size||93mm(H) x 54.5mm(W) x 8.6mm(T).|
|Compliance and Certifications|
To use this LogTag, you will need a USB interface and the LogTag Analyzer software installed on your PC.
This LogTag uses the same Reader as other LogTags, so if you already have one, it will work with these models.
If not, make sure you order one as well. As a bonus, we include the free Analyzer software on CD.
Your best bet for most situations.
This is by far our most popular model and, unless you have special requirements, your best bet for temperature logging.
$88.00 incl. GST
Go where other LogTags can’t
This is the perfect LogTag when you need to measure temperatures inside products.
Monitor temperatures inside coolers, underwater or in small spaces.
USB Temperature Loggers
No Reader Interface Required
Only have a couple of sites to monitor? This logger has the USB built in so no external Reader is required
For extremely low temperatures – with no messy probes
This specialist LogTag will record temperatures as low as -80°C – the temperature of dry ice. You can place the logger directly in with your dry ice shipment (no need for a probe) to log temperatures across the journey.
The logger is reusable and will last up to 1,000 hours at -80°C.
$165.00 incl. GST
See temperatures and alerts at a glance
Need to see temperatures and temperature events without connecting your logger to a computer? This latest LogTag has a clear display that tells you current temperature, maximum and minimum logged temperatures, alarms, and more.
$198.00 incl. GST
Log Relative Humidity
If you need to record Humidity as well as Temperature, this is the model for you. Works with the standard USB Reader.
$203.50 incl. GST
Monitor Dry Ice containers without opening them
Insert the probe into your container and attach your LogTag Dry Ice temperature logger. The LED Alert will tell you at a glance if the temperature has risen above your limit.
Works with all LogTag external probes.
$214.50 incl. GST
ABN 36 093 811 271
p: 1300 30 33 34
f: +61 2 9614 6891
PO Box 1007,
NSW 2153, Australia