LogTag Dry Ice Temperature Recorder with External Probe
$214.50 incl. GST
Insert the probe into your container and attach your LogTag Dry Ice temperature logger. The LED Alert will tell you at a glance if the temperature has risen above your limit.
Because this logger sits outside the super-cold environment, its battery life is the same as regular LogTags
If the temperature inside the package rises above the alert level, the red LED will flash, giving you a visual notification that there has been a problem.
The LogTag is so simple to set up and use that you'll be an expert in no time. We have a full LogTag training program on our site
Our probe-less Dry Ice LogTags are great for their convenience, but this probe model has its own advantages.
Importantly, you can get an instant gauge of the temperature inside the packaging – flashing red means there is a problem.
Also, battery life is better than the direct contact model.
|Sensor Measurement Range||-80°C to +40°C (-112°F to +104°F).|
|Operating Temperature Range||-20°C to +40°C (-22°F to +104°F).|
|Storage Temperature Range||-10°C to +55°C (14°F to +131°F).|
|Rated Temperature Reading Accuracy||
With the logger case sitting in an environmental temperature between 0°C and 50°C:
Better than ±1°C for -30°C to +20°C.
Better than ±1.2°C for -45°C to -30°C and +20°C to +40°C.
Better than ±1.7°C for -80°C to -45°C.
Actual performance is typically much better than the rated values. Please see the Rated Absolute Accuracy chart below.
Accuracy figures can be improved by recalibration.
|Rated Temperature Reading Resolution||
Less than 0.1°C for -80°C to 0°C.
Less than 0.2°C for 0°C to +20°C.
Less than 0.5°C for +20°C to +40°C.
Please see the Rated Native Resolution chart below.
LogTag Analyzer® currently displays to one decimal place of °C or °F. The native resolution is what is stored in the LogTag®.
|Sensor Reaction Time||Typically less than 2 minutes (T90) in moving air (1m/s) for ST10S type.|
|Recording Capacity||8032 temperature readings. 53 days @ 10min logging, 80 days @ 15min logging.|
|Sampling Interval||Configurable from 1 minute to several hours.|
|Logging Start Options||Push button start or specific date & time.|
|Recording Indication||Flashing ‘OK’ indicator / flashing ‘ALERT’ indicator.|
|Download Time||Typically less than 5 seconds for full memory (8000 readings), depending on computer or readout device used.|
|Power Source||3V LiMg battery.|
|Battery Life||2 to 3 years of normal use (based on 15 minute logging, download data monthly.|
|Real Time Clock||
Built-in real time clock.
Rated accuracy ±25ppm @ 25°C (equivalent to 2.5 seconds/day).
Rated temperature coefficient is -0.034 ±0.006ppm/°C (I.e typically +/- 0.00294 seconds/day/°C).
|Size||86mm(H) x 54.5mm(W) x 8.6mm(T).|
Compliance and Certifications
To use this LogTag, you will need a USB interface and the LogTag Analyzer software installed on your PC.
This LogTag uses the same Reader as other LogTags, so if you already have one, it will work with these models.
If not, make sure you order one as well. As a bonus, we include the free Analyzer software on CD.
Your best bet for most situations.
This is by far our most popular model and, unless you have special requirements, your best bet for temperature logging.
$88.00 incl. GST
Go where other LogTags can’t
This is the perfect LogTag when you need to measure temperatures inside products.
Monitor temperatures inside coolers, underwater or in small spaces.
USB Temperature Loggers
No Reader Interface Required
Only have a couple of sites to monitor? This logger has the USB built in so no external Reader is required
For extremely low temperatures – with no messy probes
This specialist LogTag will record temperatures as low as -80°C – the temperature of dry ice. You can place the logger directly in with your dry ice shipment (no need for a probe) to log temperatures across the journey.
The logger is reusable and will last up to 1,000 hours at -80°C.
$165.00 incl. GST
See temperatures and alerts at a glance
Need to see temperatures and temperature events without connecting your logger to a computer? This latest LogTag has a clear display that tells you current temperature, maximum and minimum logged temperatures, alarms, and more.
$198.00 incl. GST
Now with audible alarm
The new release of this popular logger features a new display layout, audible alarm and expanded 15,900 reading memory. Works with all LogTag external probes.
Log Relative Humidity
If you need to record Humidity as well as Temperature, this is the model for you. Works with the standard USB Reader.
$203.50 incl. GST
ABN 36 093 811 271
p: 1300 30 33 34
f: +61 2 9614 6891
PO Box 1007,
NSW 2153, Australia