LogTag Temperature Recorders
LogTag Temperature Recorders

[email protected]

IN STOCK & AVAILABLE FOR IMMEDIATE DISPATCH

LogTag with External Probe

LogTag Model: (Model: TREX-8)

Go where other LogTags can’t

This is the perfect LogTag when you need to measure temperatures inside products.

Monitor temperatures inside coolers, underwater or in small spaces.

A$143.00A$192.50 incl. GST

BULK DISCOUNTS NO PROBE PROBE
10-49 $128.50 $173.00
50-99 $121.50 $163.50
100+ $114.00 $154.00

Note: Bulk pricing will be applied in the shopping cart.

Push Button Start

Configure the Tag to use Push Button Start and there is no rush about getting the Tag from the Reader to the refrigerator. Logging will not begin until the Start button is pushed.

Visual Alerts

If the Tag logs temperatures outside the safe range you have set, the Alert LED will flash red, giving you a handy visual notification that there has been a problem.

Easy to use

The LogTag is so simple to set up and use that you'll be an expert in no time. We have a full LogTag training program on our site

Why use an external probe?

LogTags are tough and versatile, bu there are some places they just can’t go.

In particular, when logging the temperature of liquids, you will need a probe. An example might be  measuring the cooling rate of a large batch of custard.

Probes are also useful to monitor temperatures inside coolers and other containers without removing the lid.

Another use might be measuring soil temperatures. The probe is driven into the soil while the LogTag remains clean and protected above ground.

If you have any questions about whether LogTag is right for you, call us on 1300 08 20 20 or email [email protected].

LogTag External Probes

External Probes for LogTags

ST100J External Probe for LogTag

ST100J
40mm tip length, ⌀3.2mm

This is the probe that goes with the LeakProof Vial

ST100K – 65mm tip length, ⌀3.2mm

ST100K
65mm tip length, ⌀3.2mm

ST100L – 90mm tip length, ⌀3.2mm

ST100L
90mm tip length, ⌀3.2mm

ST100S – 30mm tip length, ⌀5mm

ST100S
30mm tip length, ⌀5mm

ST100T – 140mm tip length, ⌀5mm

ST100T
140mm tip length, ⌀5mm

 

ST100H

ST100H
Handled with 105mm tip length, ⌀5mm

 

ST100B – Untipped (bare sensor).

ST100B – Untipped

Bare sensor without stainless sheath ready for fitting to custom probe assembly.

Not rated for food contact or environmentally rated.

Specifications

Product Model TREX-8
External Sensor Measurement Range -40°C to +99°C (-40°F to +210°F)
Operating Temperature Range -40°C to +85°C (-40°F to +185°F).
Storage Temperature Range -10°C to +55°C (14°F to +131°F).
Rated Temperature Reading Accuracy Better than ±0.5°C for -10°C to +40°C. Better than ±0.7°C for -10°C to -30°C and +40°C to +60°C. Better than ±0.8°C for -30°C to -40°C and +60°C to +80°C. Better than ±1.0°C for +80°C to +99°C. Actual performance is typically much better than the rated values. Please see the Rated Absolute Accuracy chart below. Accuracy figures can be improved by recalibration.
Rated Temperature Reading Resolution Less than 0.1°C for -40°C to +40°C. Less than 0.2°C for +40°C to +80°C. Less than 0.6°C for +80°C to +99°C. Please see the Rated Native Resolution chart below. LogTag Analyzer® currently displays to one decimal place of °C or °F. The native resolution is what is stored in the LogTag®.
Sensor Reaction Time Typically less than 2 minutes (T90) in moving air (1m/s) for ST100T, ST100H and ST100S types.
Recording Capacity 8031 temperature readings. 53 days @ 10min logging, 80 days @ 15min logging.
Sampling Interval Configurable from 30 seconds to several hours.
Logging Start Options Push button start or specific date & time. Optional start delay of up to 18 hours.
Recording Indication Flashing ‘OK’ indicator / flashing ‘ALERT’ indicator.
Download Time Typically less than 5 seconds for full memory (8031 readings), depending on computer or readout device used.
Environmental IP61.
Power Source 3V Li-Mg Battery.
Battery Life 2 – 3 years of normal use (based on 15 minute logging, download data monthly).
Real Time Clock Built-in real time clock. Rated accuracy ±25ppm @ 25°C (equivalent to 2.5 seconds/day). Rated temperature coefficient is -0.034 ±0.006ppm/°C (I.e typically +/- 0.00294 seconds/day/°C).
Standard Remote Sensor Cable Length Standard: 1.5m (4’11″). Extended: 3m (9’10″) (Recommended maximum).
Remote Sensor Cable Type PTFE (FDA food contact rated), coaxial.
Size 86mm(H) x 54.5mm(W) x 8.6mm(T).
Weight 36g (without External Probe).
Case Material Polycarbonate.
Compliance and Certifications FDA CFR21 Part 11 FCC EMC Directive CE EMC DirectivesConforms to RoHS

Do you have the USB Reader Interface?

To use this LogTag, you will need a USB interface and the LogTag Analyzer software installed on your PC.

This LogTag uses the same Reader as other LogTags, so if you already have one, it will work with these  models.

If not, make sure you order one as well. As a bonus, we include the latest free LogTag Analyzer software on USB.